Installation of Firmware In order to install the latest firmware proceed as follows: 1. Download the VIBSCANNER 2 firmware file onto your PC. 2. Switch on the VIBSCANNER 2 and connect with PC over USB. 3. Open Windows Explorer 4. Click under [Devices and drives] on the VIBSCANNER 2 and open the folder „update“ under „System Data“. 5. Copy the update file (VSC2_vxxxx.rom] from the PC into the folder „update“ 6. Disconnect VIBSCANNER 2 from PC. 7. Options: Update now Update is performed immediately Update later Update is performed when device switched on next time. 8. Demo Route available after performing a factory reset THIS WILL DELETE ALL DATA. Please copy previous data to your PC or OMNITREND Center software before